Forum - Recent Posts

RE: Dynon Skyview Data Transfer, Drive Selection

Rob Weijers — Thu, 06 Aug 2026 12:31:09 +0000

Hi Peter and all others interested in betatesting the new Dynon data Manager app, have a look at https://dynondatamanager.pocketfms.com/manual , there you will also find the download links for the windows, macOS silicon and MacOS Intel versions. Please email findings to support@easyvfr4.aero

Heiko, I've never thought about two sticks for the same serialnumber, but it makes very much sense for all cockpits with two skyviews. I just tried it in the Dynon Data Manager (DDM), you can add for example serial 11718 and 011718 (so a prefix zero). This works nice.

RE: Safesky change filter by altitute, same as airspace filter

Stewart Buckingham — Thu, 06 Aug 2026 11:33:50 +0000

Once EasyVFR is in Flight Mode, the traffic display is filtered by relative altitude (you can adjust the altitude range of the filtering). However, by default, if you are not in Flight Mode, EasyVFR displays ALL traffic irrespective of altitude. This is so that when you are preparing to fly, you will easily be able to see some traffic on the display, which gives you confidence that your connection to SafeSky (or whatever other traffic system you use) is functioning correctly. If you do not want to see teh high-level traffic when you are not actually flying, you can easily switch EasyVFR so that the relative altitude filter is applied even if not in Flight Mode:- Tap the Status Dot in the lower right area of teh screen and then on the page that appears tap "Traffic", and turn OFF the "Filter only in Flightmode" switch.

Hope this solves your problem

Stu B

Team EasyVFR

RE: Dynon Skyview Data Transfer, Drive Selection

Peter Simon — Wed, 05 Aug 2026 06:20:48 +0000

Hi Rob,

if possible, I really would like to support you testing the upcoming app.

kind regards

Peter