02SEP2025: 4.6.1 Is promoted to Production.
17AUG2025: 4.6.0 Is release candidate 1.
24JUL2025: 4.5.9 Fixes the crashes when route planning was done with the option "update route while editing" was enabled in menu->preferences.
24JUL2025: 4.5.7:
Dear aviators!
Some of you are probably enjoying a well-deserved vacation with your family while we’ve been working hard on the next EasyVFR 4 update! ✈️
Besides the usual bug fixes and small improvements, this version brings two major steps forward:
Performance and Responsiveness
Although still in progress, we’ve made noticeable improvements to the overall UI responsiveness of EasyVFR 4. We believe it’s already worthwhile for you to test these enhancements and share your feedback!
GPS Sharing and AutoPilot Steering
This update brings a powerful new capability for fixed-install cockpit use: [b]EasyVFR 4 can now send GPS and AutoPilot commands[/b] to external devices!
Supported NMEA messages:
- $GPRMC
- $GPGGA
- $GPRMB
- $GPAPB
- $GPRMH
- $GPVTG
Communication options:
- TCP or UDP over Wi-Fi or network cable
- Perfect for Wi-Fi-to-serial (RS-232) adapters
We've been using the HF2211 hardware module during development. It connects RS-232 serial devices to a network and supports both TCP and UDP. It’s highly flexible:
- Acts as a Wi-Fi access point
- Or joins an existing network (ideal when using other AP-only devices like SkyEcho 2)
Introducing: Plan(e)station Mode
For those of you who fly with a permanently installed cockpit tablet, this new feature automates several tasks:
- Auto-sleep[/b] when mains power is disconnected (e.g. master switch off)
- Auto-reset[/b] to a preconfigured state when power is restored (aircraft, map config, etc.)
- Auto-center and auto-zoom after user panning or zooming
- Auto-download of data (AeroData, weather, NOTAMs...) when on ground and speed is zero and connected to Wi-Fi or mobile network
We’d love your feedback!
Please try out this version and share your experiences, findings, and suggestions right here in the forum. Your input helps us make EasyVFR even better.
Cheers,
The EasyVFR 4 Dev Team
RELEASE NOTES
All changes in this beta cycle since the last public App Store release:
4.6.0 beta (17AUG2025) RC1
- IMPROVED: Minor improvement to Radio card when EV4 has to choose between 2 equally interesting airspaces.
- IMPROVED: Menu->Preferences -> options Show VPV and Show Instruments automatically are now simple yes/no buttons
- IMPROVED: When in flying mode with a route loaded and Auto Wind is off, then the user can now still modify the wind for each leg.
- IMPROVED: The settings to set Path width for MSA calculations, Weather briefing and NOTAM briefing for routes has been moved to EasyVFR 4 menu->Preferences. And all now respect the selected Distance Unit at EasyVFR 4 menu->Preferences->Units.
4.5.9 beta (08AUG2025)
- IMPROVED: Radio card frequency and Squawk for current and next airspace.
- IMPROVED: "Update Route While Editing" at EasyVFR 4 Menu->Preferences, is rephrased to "Automatically Confirm Route Changes" to better reflect its actual behaviour.
- FIXED: When in EasyVFR 4 Menu->Preferences, the setting Update Route While Editing" was enabled the EV4 would crash as soon as anything had to do with routes.
- FIXED: When the Airfield Info card contained more than 1 phone number then tapping on one of these constructed a result that could not be auto dialed.
- FIXED: Importing GPX routes sometimes created spurious legs
- FIXED: Trikit added highest obstacle AMSL to the highest terrain MSL, while it should have been the max of the two.
- FIXED: When switching chart hemes while flying mode is on EV4 would crash.
4.5.7 beta (24JUL2025)
- NEW: GPS Sharing & AutoPilot Steering via Menu > System > GPS Sharing / AutoPilot Settings
- NEW: Plan(e)station Mode Automate cockpit tablet behavior based on power state, how-to follows later
- PERFORMANCE: Some more work done on responsiveness of UI interactions.
- IMPROVED: Terrain Elevation consistency:
- Two user-configurable terrain widths:
- NarrowPath (default 1 NM): used in VPV narrow route, Route Planning, AGL readouts
- WidePath (default 10 NM): used for MSA calculations and VPV wide route
- Configurable via [i]MapLayers -> Terrain
- Two user-configurable terrain widths:
- IMPROVED: Updated Android Target SDK to 35 (Android 15)
- IMPROVED: Improved NOTAM plotting (e.g. restricted areas in Hungary)
- IMPROVED: Airspace highlighting now persists when tapping on the map
- IMPROVED: First-time install now allows choosing topographical basemap (vector or raster)
- IMPROVED: EasyVFR 4 settings now backed up to cloud and offered for restore on reinstall
- FIXED: Rare case where VPV would not show crossed airspaces.
- FIXED: Info card didn’t show position marker when using raster maps like satellite imagery
- FIXED: Long NOTAM text sometimes cut off in the Pro Route Planning tab.
- FIXED: "Clear all" button on input fields could render the field unusable after clearing (bug introduced in 4.5.1)
- FIXED: Info card bar graph-style airspaces rendering issue when overlapping same-type/class airspaces
- FIXED: Vertical Profile didn’t render altitude reference lines when evaluating weather for local flights.
- IMPROVED: Default METAR & TAF depiction circles increased in size.
- IMPROVED: METARs & TAFs are now rendered at higher zoom levels also.
- IMPROVED: Radio card now reports current position additional to nearest airport, also based on a nearby reasonably large sized city.
- IMPROVED: Zooming on Windows with mouse wheel while a raster chart is active as a basemap.
- IMPROVED: When an airspace is highlighted using the info card, a second tap on the highlighted airspace will stop the highlighting.
- IMPROVED: When an airspace is highlighted using the info card, closing the info card will also stop the highlighting. (Changed "infocard" to "info card" in both instances.)
- FIXED: Apple devices with 2GB RAM or less sometimes popped up a memory error when showing plates.
- FIXED: After adding a country, Airport Features including traffic patterns and approaches were not downloaded; updating AeroData was required to do this.
- FIXED: Creating Approach Plates for MGL units sometimes resulted in the MGL unit not accepting the plates.
- FIXED: When changing METAR/TAF depiction style, the map would only get updated after a pan or zoom.
- FIXED: DWD GAFOR Full text briefing was not rendered completely.
- FIXED: The map layer setting Weather -> Wind on VPV and setting Weather -> SigWX On VPV had no effect.
- FIXED: Highlighting airspaces in the info card did not reset the initially highlighted airspace.
- FIXED: EasyVFR 4 menu -> Help & Legal -> About EasyVFR did not work on Windows.
- FIXED: When an input field was cleared, the cursor would not advance back to the leftmost position.
BETA DOWNLOADS
📱 Mobile & Tablet
🍏 iOS, iPadOS, and Apple Silicon Mac
Minimum requirements:
- 64-bit and 2GB RAM.
Effectively:
- iPhone 8 and higher.
- iPad Air 3 and higher.
- iPad Mini 5 and higher.
- iPad Pro's.
- M1 MacBooks and higher.
The iPad Mini 6 and newer, and any iPad Pro perform extremely well.
Download Steps:
- Install the Apple TestFlight app via the Apple AppStore.
- Go to the following URL to download the latest version of EasyVFR 4 via TestFlight.
👉 Open the EasyVFR 4 page in the Apple TestFlight app
🤖 Android
IMPORTANT: Devices with the old 32-bit Android OS are not supported
Minimum requirements:
- 64-bit OS, +3GB RAM. Android 10 and higher is advised.
At least compatible (but slow) are:
- Huawei MediaPad M5.
- Xiaomi Mi Pad 4.
- Samsung Galaxy Tab S2 (except SM-T810). (slow)
- Samsung Galaxy Tab S4.
We see good results with Samsung Galaxy Tab S6, and higher and most modern high-end tablets and smartphones.
Download Options:
- Google Play: You can download the beta directly via Google Play when enrolled in the beta program on the Google Play app page.
👉 Open the EasyVFR 4 page in Google Play to enrole for beta - Sideload (alternative): To install you must enable the option: "Allow the installation of apps from sources other than Play store" in Android Settings, Lock screen and Security. Some Android devices require you to tap&hold the link below, then choose [Download link] to store the APK on your device from where you then can install this downloaded APK.
Download APK https://members.pocketfms.com/WebProgramDownloads/EasyVFR4/EasyVFR4_4.6.1.apk
💻 Desktop and Laptop
🪟 Windows
Minimum requirements:
- 32-bit, 2GB RAM, Windows 8 and higher is advised.
Download: Download EasyVFR 4 for Windows https://members.pocketfms.com/WebProgramDownloads/EasyVFR4/EasyVFR4_win32_4.6.1.exe
🍏 Apple Silicon Mac
See the iOS version.
🍎 Intel Macs
IMPORTANT: Intel Macs on Big Sur and Monterey need to have the latest macOS version 11.6.1 or 12.0.1 or higher installed.
Intel-based Macs can only install the below .dmg file and need to follow the below instructions.
Minimum requirements:
- Most 64-bit macOS versions. E.g. High Sierra, Mojave, Catalina. BigSur 11.6.1 and Monterey 12.0.1 and up.
- Apple Silicon M1 and greater Macs can download via the iOS AppStore.
Download: Download EasyVFR 4 for Intel Macs https://members.pocketfms.com/WebProgramDownloads/EasyVFR4/EasyVFR4_osx_4.6.1.dmg
Installation instructions:
- After downloading the DMG file, open it and drag the EasyVFR 4 icon into the Applications folder. EasyVFR 4 is now available via Launchpad.
- Users of MacOS Sequoia must first enable the option to offer the option to allow a non-signed applications, see https://www.idownloadblog.com/2024/08/07/apple-macos-sequoia-gatekeeper-change-install-unsigned-apps-mac/ for instructions
- When you get the message "EasyVFR4.app can’t be opened because it was not downloaded from the App Store" choose [Open in Finder] from that popup, then right-click on EasyVFR4.app and choose open. Now the same popup will appear, now with a [Open] button.
- From there on you can launch EasyVFR 4 from the launchpad without this warning.
- With every update, you need to redo step 2. 🔄
Hello,
After update actions on routes do not work. Evf4 quits without notice while dowloading routes, creating local flight or trip, inserting or appending by rubberbanding or by pointing, ...
Happens on redmi note 9 pro android 12; on galaxy tab a7 android 14.
Same odd behaviour on Win 11 - Galaxy book 2 pro 360
Grtz,
Jef
Hi
I m struggling with the same problem as mentioned by Jef!!
Cheers, Urs
I’m sorry for the troubles caused. A temporary solution is to turn off the option menu->preferences->update route while editing. I expect a fix to be available in a few days.
Thnx. Works fine with this temp solution!
Thanks for the fix Rob. Switched on "automatically confirm...” in menu preferences. This speeds up creating/changing routes.
THANK YOU!