Together we make EasyVFR

Meldingen
Alles wissen

Lognav and speed

2 Berichten
2 Gebruikers
0 Reactions
227 Bekeken
Berichten: 1
Beta tester
Topic starter
Active Member
Deelgenomen: 3 jaar geleden
On my nav log, I automatically have by default not GS linked to my wind but I would like to have my nav log without wind calculation with my IAS configured on my plane.

I tried to deselect automatic wind and plan my nav for a later date but my lognav always takes a wind into consideration.

Do you have a solution?

1 reactie
Berichten: 1036
Admin
Famed Member
Deelgenomen: 6 jaar geleden

Hi Axel, 

You already found part of the solution 👍 . When you turn off auto wind in the routeplanning options you will see the option [Reset Wind] next to it becomes enabled. What this button does is take the wind entered on the first leg, and copy that to all the other legs. The trick is now to first change the wind for the first leg to 0/0 , then open the Pro routeplanning, there choose the route tools (you used that already to turn off auto wind) and tap on the [reset wind] button. Now all legs will copy the 0/0 wind from the first leg. 

However, removing the wind does not remove the correction applied for altitude. If you want to have total control then you should adjust your aircraft Performance profile to Expert Mode (menu->Aircraft Profile->Performance Data), here you can define actual TAS values for various altitudes

 

 

 

Beantwoorden
Mijn winkelwagen
Je winkelwagen is leeg.

Het lijkt erop dat je nog geen keuze hebt gemaakt.